CBB R-250

031-1792  

25G

for Electrophoresis

Manufacturer : FUJIFILM Wako Pure Chemical Corporation

Storage Condition : Keep at RT.

CAS RN® : 6104-59-2 Molecular Formula : C45H44N3NaO7S2 Molecular Weight : 825.97

Outline Color Index Number : 42660

Agar, Powder

010-08725

500g

for Bacterial Culture Medium

Manufacturer : FUJIFILM Wako Pure Chemical Corporation

Storage Condition : Keep at RT.

CAS RN® : 9002-18-0

The product is used to prepare minimum glucose agar plate and top agar in the Ames test, which is a mutagenicity test using 

microorganisms.

Gelling temperature: 35 to 38 degrees C

Gel strength: 450 to 550 g/cm2

Appearance White - slightly brown, crystalline powder - powder

Freezing Pointゼリー凝固点 : 35 - 38 degrees C

L-Ascorbic Acid Phosphate Magnesium Salt n-Hydrate

013-12061

10G

for Biochemistry

Specification Assay : 90.0+% (HPLC)

Manufacturer : FUJIFILM Wako Pure Chemical Corporation

Storage Condition : Keep at RT.

CAS RN® : 1713265-25-8 Molecular Formula : (C6H6O9P)・3/2Mg・nH2O Molecular Weight : 289.54(anhydride)

This product is for research use only. Do not administer it to human.

L-Ascorbic Acid Phosphate has been shown to promote cell growth and collagen synthesis. Specifically, Asc 2-P increases the

 steady state levels of mRNA for type I collagen chains and elevates the transcriptional rates of type I collagen genes.

Problems exist, however, with typical ascorbic acid, the greatest of which is its short biological half-life. Free ascorbic acid is

 very unstable in solution, especially under culture conditions of neutral pH and 37 degrees C. L-Ascorbic acid phosphate is

 much more stable product and can thus be used more easily and effectively.

AppearanceWhite - slightly yellow, powder or mass

2-Acetyl-4-tetrahydroxybutylimidazole Standard

013-24271

100mg

for Food Analysis

Specification Assay : 98.0+% (HPLC), 98.0+% (qNMR)

Manufacturer : FUJIFILM Wako Pure Chemical Corporation

Storage Condition : Keep at 2-10 degrees C.

CAS RN® : 94944-70-4 Molecular Formula : C9H14N2O5 Molecular Weight : 230.22

This product is for research use only. Do not administer it to human.

This product is listed in the Japanese Standard of Food Additives as a standard for testing caramel specifications.

TRM series: This product is a traceable reference materials evaluated by the National Metrology Institute of Japan (NMIJ) and 

confirmed uncertainty by our company. The purity of this product is guaranteed through quantitative NMR.

Packed on argon gas

Appearance White - slightly yellowish brown, crystals - powder

Melting Point about 230 degrees C (dec.)

AquaBlot(TM) 10×High Efficiency Transfer Buffer

015-26213

1L

for Blotting

Manufacturer : FUJIFILM Wako Pure Chemical Corporation

Storage Condition : Keep at RT.

his product is for research use only. Do not administer it to human.

This is a 10× transfer buffer superior in transfer efficiency to the Towbin buffer (Tris-glycine-methanol).

Dilute 10 times with deionized water before use. No methanol needs to be added.

* Methanol is necessary for wetting a PVDF membrane.

AppearanceColorless clear liquid

Agar (Powder)

016-11875

500g

for Plant Culture Medium

Manufacturer : FUJIFILM Wako Pure Chemical Corporation

Storage Condition : Keep at RT.

CAS RN® : 9002-18-0

In the field of plant tissue culture, soft agar with

 high water-holding capacity is used most frequently as base material for medium for each culture stage, including the basic

 media such as MS medium and White's medium that are employed for holding of callus and [??? shaku] or induction of 

redifferentiation.Agar powder for plant culture medium should be inexpensive and have high transparency. The product has

 these qualities required for plant tissue culture.Gel strength (1.5 %): 500 to 800 g/cm2Transparency (1.5 %sol): min. 96 %

 (60 degrees C, 655 nm)

Appearance White - pale yellowish brown, powder

Anti Iba1, Rabbit (for Immunocytochemistry)

019-19741

50ug

for Immunochemistry

Manufacturer : FUJIFILM Wako Pure Chemical Corporation

Storage Condition : Keep at -20 degrees C.

Source : Rat

Cross‒Reactivity : Human, Mouse, Rat

Host : Rabbit

Application : ICC, IHC(Frozen)

ba1 (Ionized calcium-binding adapter molecule1) is an approximately 17 kDa calcium-binding protein. It is used as a microglial

 marker because it is expressed specifically in microglia in the central nervous system1). It is expressed in both resting and

 activated microglia, but is reportedly expressed more highly in activated microglia2). It is also expressed in macrophages in

 peripheral tissues and is known as AIF-1 (Allograft inflammatory factor-1). Iba1 binds to F-actin in cells to form actin bundles. 

The formation of actin bundles is thought to be required for the membrane ruffling observed during cell migration and phagocytosis3).

Fujifilm Wako’s "Anti Iba1, Rabbit (for immunocytochemistry)" (Product Number 019-19741), which allows even microglia 

processes to be stained by immunohistochemical staining, is used by researchers all over the world as a microglia marker 

antibody standard.

Bialaphos Sodium Salt

022-15413

500mg

for Biochemistry

Specification Assay : 75.0+% (HPLC)

Manufacturer : FUJIFILM Wako Pure Chemical Corporation

Storage Condition : Keep at RT.

CAS RN® : 71048-99-2 Molecular Formula : C11H21N3NaO6P Molecular Weight : 345.26

This product is a nonselective stem and leaf-treating herbicide produced by microorganism (Streptomyces hygroscopicus). 

Glutamine synthesis is inhibited by glutamine synthetase inhibitor. Ammonia and glutamic acid accumulate in plants eventually

 resulting in apoptosis o

Appearance White - pale brown, crystalline powder - powder

Specific Rotation -18 - -27 degrees (D/20 degrees C)(c=1,H2O)

Blasticidin S Hydrochloride

029-18701

100mg

for Genetic Research

Specification Assay : 98.0+% (HPLC)

Manufacturer : FUJIFILM Wako Pure Chemical Corporation

Storage Condition : Keep at 2-10 degrees C.

CAS RN® : 3513-03-9 Molecular Formula : C17H26N8O5・HCl Molecular Weight : 458.90

Outline This is an inhibitor of protein synthesis in gram-positive bacteria, fungi, and yeast.

Resistance genes (derived from bacteria: bsr, derived from mold: bsd) have been isolated and used for the selection of genetically

 modified plants.

- A nucleoside antibiotic

- Inhibits protein synthesis in both eukaryotic and prokaryotic cells.

Concentration used: 50-100 μg/mL (bacteria); 2-10 μg/mL (mammalian cells)This product is for research use only. Do not

 administer it to human.

Purpose For selection of transfected cells

Instructions Selection in E. coli: 50 - 100 μg/mL

(Use Low Salt LB medium)

Selection in mammalian cell lines: 2 - 10 μg/mL

Appearance White - nearly white, crystalline powder - powder

Origin / Source Streptomyces griseochromogenes

Solubility Soluble in water.

CBB R-250

031-17922

25G

for Electrophoresis

Manufacturer : FUJIFILM Wako Pure Chemical Corporation

Storage Condition : Keep at RT.

CAS RN® : 6104-59-2 Molecular Formula : C45H44N3NaO7S2 Molecular Weight : 825.97

Outline Color Index Number : 42660

0.2mol/L Cacodylate Buffer (pH 7.4)

036-18175

500mL

for Pathology Research

Manufacturer : FUJIFILM Wako Pure Chemical Corporation

Storage Condition : Keep below 25 degrees C.

Molecular Formula : (CH3)2AsOOH

Outline This product is for research use only. Do not administer it to human.

Appearance Colorless clear liquid

pH pH(25 degrees C): 7.3 - 7.5

Concentration 0.18 - 0.22 mol/L

Ethylene Glycol Chitin

056-07121

100mg

for Biochemistry

Manufacturer : FUJIFILM Wako Pure Chemical Corporation

Storage Condition : Keep at 2-10 degrees C.

CAS RN® : 9056-32-0

AppearanceLyophilisate

Gellan Gum

073-03071

250g

for Plant Tissue Culture

Manufacturer : FUJIFILM Wako Pure Chemical Corporation

Storage Condition : Keep at RT.

CAS RN® : 71010-52-1 Molecular Formula : N/A

Outline This product consists of polysaccharides produced by Pseudomonas elodea, deacetylated and purified, and glucose, 

rhamnose and uronic acid are its active component.[Merits]1. It offers clear solid medium after gelling due to a higher clarity

 than agar allowing easy observation inside the medium.2. Soluble salts are required for gelling. Therefore, preparation of gels 

of various hardness is available by selecting the type of salt and amount of its addition as well as the amount of gellan gum 

used.3. A smaller amount of gellan gum offers gel strength equal to agar.4. It can accelerate growth rate of plant bodies.5. 

It is heat-resistant, not solating at high temperatures, allowing autoclave sterilization several times.6. Similarly to agar, it melts

 by heating (90 degrees C minimum) and gelates by cooling (30 to 50 degrees C maximum).

This is a dried powder of polysaccharides produced extracellularly by Pseudomonas elodea, deacetylated and purified, and it is

 used as a gelling agent replacing agar in the culture media for plant tissues and microorganisms. It becomes a transparent gel

 at a lower concentration of 0.2 to 0.4 % as compared to agar and is said to offer good callus growth.

Appearance White - pale brown, crystalline powder - powder

pH pH (10g/l aqueous slurry,25 degrees C) :4.0 - 7.0

Gelatin

077-03155

500g

Wako 1st Grade

Manufacturer : FUJIFILM Wako Pure Chemical Corporation

Storage Condition : Keep at RT.

CAS RN® : 9000-70-8

Outline This product is for research use only. Do not administer it to human.

AppearancePale yellow - yellowish brown, crystals - crystalline powder or mass

Glufosinate Ammonium Standard

079-05371

100mg

for Pesticide Residue Analysis

Specification Assay : 89.5 - 93.4% (qNMR) [as glufosinate (C5H12NO4P)]

Manufacturer : FUJIFILM Wako Pure Chemical Corporation

Storage Condition : Keep at 2-10 degrees C.

CAS RN® : 77182-82-2 Molecular Formula : C5H15N2O4P Molecular Weight : 198.16

Precautions for Use Packed on argon gas

Appearance White - nearly white, crystalline powder - powder

Melting Point 215 degrees C

L-012

120-04891

100mg

for Biochemistry

Specification Assay : 90.0+% (HPLC)

Manufacturer : FUJIFILM Wako Pure Chemical Corporation

Storage Condition : Keep at -20 degrees C.

CAS RN® : 143556-24-5 Molecular Formula : C13H8ClN4NaO2 Molecular Weight : 310.67

Appearance White - yellow, crystals - powder

Lysyl EndopeptidaseR, Mass Spectrometry Grade (Lys-C)

125-05061

20ug x5

for Proteome Research

Manufacturer : FUJIFILM Wako Pure Chemical Corporation

Storage Condition : Keep at -20 degrees C.

Outline This product is for research use only. Do not administer it to human.

[BIOCHEMISTRY]

For Proteome Research!

Among the most important techniques in proteome analyses is the in-gel digestion of protein spots/bands that have been 

resolved by electrophoresis using digestive enzymes, such as trypsin and lysyl endopoptidase. Proteins can be identified by

 mass spectrometry analysis of the peptides produced by in-gel digestion, and further information regarding post-translational

 modifications can be obtained.Lysyl Endopeptidase, Mass Spectrometry Grade is a freeze dried product that retained sufficient 

activity for in-gel digestion and packed in very small quantities for convenience purposes.

[Features]

High specificity and efficiency of protein digestion allow for easy database searches by peptide mass.

Improved cleavage at lysine residue and increase in the number of peptides are obtained by combination with trypsin.

Packed in very small quantities according to the amounts used so that sufficient activity for in-gel digestion may be retained.

[Related Products]

Wako Catalog #293-57701 Negative Gel Stain MS Kit, for Electrophoresis (20 tests)

Wako Catalog #299-58901 Silver Gel Stain MS Kit, for Electrophoresis (20 tests)

[Physical properties]

Appearance: Lyophilized form containing ca. 10% Tris-HCl buffer, pH 8.

Activity: Shown on each label

Molecular Weight: 27,000 (gel filtration); 30,000 (SDS electrophoresis)

Solubility: Soluble in water or buffer solution.

Stability: Stable at 4 degrees C, when dissolved in buffer of pH 5~12. Stable at 30 degrees C in the range of pH 6~11, but

 unstable at 50 degrees C or higher.

Optimal pH: 9.0 -9.5 (Amidase activity)

Isoelectric point: 6.9~7.0

Substrate specificity:

Hydrolysable substrate ... Tos-Lys-Ome, Bz-Lys-NH2, Bz-Lys-pNA, Lys-pNA Unhydrolysable substrate ... Bz-Arg-NH2, Bz-Arg-pNa,

 Arg-pNA

Inhibitors: DFP, PMSF, TLCK

[References]

Wada, Y., and Kadoya, M.: J. Mass Spectrom., 38, 117 (2003).

Shevchenko, A., Wilm, MM., Vorm, O., and Mann., M.: Anal. Chem., 68, 850 (1996).

Source: Bacteria

Originally, the source of this product was indicated as "Achromobacter lyticus" based on the physiological and morphological

 properties of the bacteria. However, we confirmed that the 16SrDNA sequence was highly homologous to that of Lysobacter

Appearance Lyophilisate

Origin / Source Bacteria

Activity0.03 - 0.07AU/vial

Nuclease P1

145-08221

500U

for Genetic Research

Manufacturer : FUJIFILM Wako Pure Chemical Corporation

Storage Condition : Keep at 2-10 degrees C.

CAS RN® : 54576-84-0

Outline Nuclease P1 decomposes the 3'-5'-phosphodiester bond of RNA and heat denatured DNA. It also decomposes the 

3'-phosphomonoester bond of mono-and oligonucleotides.In the presence of sodium chloride at 400 mmol/L or higher (pH 6.0),

 in particular, it does not affect double-stranded DNA.

Usage example

A. Sample : 200uL of RNA or heat-denatured DNA at a density of 2mg/mL.

B. Reaction Buffer : 200uL of 0.01 mol/L barbital(veronal) acetate buffer, pH5.3*.

C. Enzyme : 100uL of 100 units/mL of Nucelase P1 solution with distilled water.

D. Stop Solution : 500uL of cold uranyl acetate buffer(0.25% of uranyl acetate and 2.5% perchloric acid)

*barbital(veronal) acetate buffer, pH5.3 : Prepare 0.01mol/l Barbital Sodium Salt in water and adjust it to pH 5.3 with acetic acid.

1. Mix each 200uL of A, B and C.

2. Incubate it at 50 degree C for 1 hour.

3. The reaction can be stopped by adding 500uL of D.

Reference

Masao Fujimoto, Akira Kuninaka & Hiroshi Yoshino(1974)Purification of a Nuclease from Penicillium citrinum, Agr. Biol. Chem.,38(4), 777-783.

Appearance Lyophilisate

Origin / SourcePenicillium citrinum

Polyvinyl Alcohol

160-08295

500G

for Absorptiometric Analysis

Manufacturer : FUJIFILM Wako Pure Chemical Corporation

Storage Condition : Keep at RT.

CAS RN® : 9002-89-5 Molecular Formula : [-CH2CHOH-]n

Outline

A saponified product of polyvinyl acetate, one of a variety of polyvinyl alcohols. The product is of the partial saponification type

 and has an average degree of polymerization of about 2,000.

Appearance White - slightly yellow, small granules - powder

Melting Point > 300 degrees C

Density 1.21 - 1.31g/cm3

Pectin, from Citrus

168-00555

500G

Practical Grade

Manufacturer : FUJIFILM Wako Pure Chemical Corporation

Storage Condition : Keep at RT.

CAS RN® : 9000-69-5

AppearanceWhite - pale brown, powder

Sucrose

193-00025

500G

Wako 1st Grade

Manufacturer : FUJIFILM Wako Pure Chemical Corporation

Storage Condition : Keep at RT.

CAS RN® : 57-50-1 Molecular Formula : C12H22O11 Molecular Weight : 342.30

Appearance White, crystals - crystalline powder

Specific Rotation +66.0 - +67.0°(D/20 degrees C) (After Drying)

Sodium Dextran Sulfate 5,000

199-08361

100G

for Biochemistry

Specification Assay : Total sulfur : 15.0 - 20.0%

Manufacturer : FUJIFILM Wako Pure Chemical Corporation

Storage Condition : Keep at RT.

CAS RN® : 9011-18-1 Molecular Weight : 1,000 - 9,000

Outline It is a sulfated product of dextran, which is a polymer of glucose, a polysaccharide. The average molecular weight is 

approx. 5000. Through a beta-lipoprotein analysis suitability test, its quantitative capability has been confirmed.

Precautions for Use Packed on argon gas

Appearance White - slightly yellow, crystalline powder - powder

pHpH (50g/l, 25 degrees C) : 4.5 - 8.0

Thiamin Hydrochloride

201-00852

25G

Wako Special Grade

Specification Assay : 98.0+% (HPLC)

Manufacturer : FUJIFILM Wako Pure Chemical Corporation

Storage Condition : Keep at RT.

CAS RN® : 67-03-8 Molecular Formula : C12H17ClN4OS・HCl Molecular Weight : 337.27

Appearance White, crystalline powder - powder

pH 2.7 - 3.4 (10g/L, 25 degrees C)

Melting Point about 245 degrees C (dec.)

WIDE-VIEW TM Prestained Protein Size Marker Ⅲ

234-02464

500uL x3

for Electrophoresis

Manufacturer : FUJIFILM Wako Pure Chemical Corporation

Storage Condition : Keep at -20 degrees C.

Outline This product is for research use only. Do not administer it to human.

A stained protein size marker. There are twelve recombinant proteins contained, and they covalently bind to blue,red and green

 chromophores.

A band for 75 kDa shows red, 25 kDa shows green and other bands exhibit blue color

M.W. (kDa): 245, 180, 135, 100, 75 (red), 63, 48, 35, 25 (green), 20, 17, 11

The amount of recommended usage : 5μL/Lane

AppearanceBlue liquid

MagCapture(TM) Exosome Isolation Kit PS Ver.2

294-84101

2Tests

for Genetic Research

Manufacturer : FUJIFILM Wako Pure Chemical Corporation

Storage Condition : Keep at 2-10 degrees C.

Fructooligosaccharides Set

295-73401

1Set

for HPLC

Specification Assay : 99.0+% (HPLC)(1-Kestose), 99.0+% (HPLC)(Nystose), 80.0+% (HPLC)(1F-Fructofuranosylnystose)

Manufacturer : FUJIFILM Wako Pure Chemical Corporation

Storage Condition : Keep at RT.

Outline This product is for research use only. Do not administer it to human.

This set consists of 250 mg vial each of 1-Kestose, Nystose and 1F-Fructofuranosylnystose. It is applicable to analyze the 

fructooligosaccharide components contained in foods and beverages.

Precautions for Use Packed on argon gas

Appearance White, crystals - powder(1-Kestose), White, crystalline powder - powder(Nystose), White, crystalline 

powder - powder(1F-Fructofuranosylnystose)

Specific Rotation +27.0 - +32.0 degrees (D/20 degrees C)(c=5,H2O)(1-Kestose)

+10.0 - +11.5 degrees (D/20 degrees C)(c=5,H2O)(Nystose)

0 - -5.0 degrees (D/20 degrees C)(c=5,H2O)(1F-Fructofuranosylnystose)